Warcomp 58 Muzzle Brake


Ni na zalogi, pokličite za dobavo.



WARCOMP 58 is a two port muzzle brake, designed for semiautomatic and full automatic assault rifles VZ 58, CZ 858 and its variants with the same barrel threading. It ensures significant reduction of recoil and muzzle rise. Use of WARCOMP 58 results in a very neutral feel to the rifle. The WARCOMP 58 is made out of stainless steel of yield strength circa 950 MPa and with carbonitrid coating. This helps with the corrosion reduction, which is a common problem with muzzle brakes due to their shape and difficulty to clean. Mounting is via standard threading and is secured in position with 2 Allen screws, so there is no need for time consuming and laborious adjustment with a lathe, or adding washers so it would fit on the locking pin. This mount allows for quick attachment and detachment. The procedure lasts about 30 seconds and required is only a standard Allen key which is included in the package.
The greatest advantage of WARCOMP 58 and its fast detachment is the ease of cleaning of the threading and crown of the barrel, which is often not possible with common fixed or hard to detach muzzle brakes. This causes corrosion especially when corrosive ammunition with mercury primers is being used. WARCOMP 58 does not decrease accuracy, nor is its use shifting the point of impact. Also venting gases do not cause lateral movement when shooting near an obstacle and there is no dust rise when shooting from a standard prone position. Mounting and notch for fixing pin allows for slight angle rotation if needed.WARCOMP 58 is unique with its effectiveness and its mount because it eliminates mounting difficulties caused by high tolerances common for VZ 58 or CZ 858 assault rifles.

Dodatne informacije


CAA Tactical